.

.

.

Tinsmith Free Sample Resume - Resume Example - Free Resume Template - Resume Format - Resume Writing






"Professional Resume Writing Services" - Click Here

"Instant Cover Letters" - Click Here

"Amazing Resume Creator" - Click Here





AMY SMITH
123 Main Street Atlanta, Georgia 30339
Home: (555) 555-1234, Cell: (555) 555-1235 asmith@sample~resume.com


Objective:   Seek the Position of Tinsmith

SUMMARY:   Remarkably talented, creative and skillful Tinsmith with more than six years experience inspecting, repairing and installing all types of roofs; manufacturing and repairing tin ware and sheet metal ware such as heating ducts, steam kettles, gutters, roof flashing, metal containers, etc.

Summary of Qualifications
  • Excellent knowledge of the principles, methods, materials, tools and equipment used in the roofing and tinsmith trade.
  • Remarkable working knowledge of the physical properties of roofing materials.
  • Strong working knowledge of the mathematics of the roofing and tinsmith trade.
  • In-depth knowledge of the building and safety codes applicable to roofing and tinsmith work.
  • Exceptional ability to plan and lay out roofing and tinsmith work.
  • Profound ability to read, interpret and work from plans, specifications, blueprints and schematic drawings.
  • Immense ability to use the tools, machines, equipment and materials of roofing and tinsmith trade.
  • Remarkable ability to understand and carry out oral instructions.
  • Uncommon ability to work from scaffolds and ladders and on roofs.
  • Immense ability to stand for long periods of time, to crawl, climb, bend and to do moderately heavy lifting.
  • Excellent working knowledge of the rules and regulations of the facility governing the activities of state wards assigned to maintenance activities.
  • Huge ability to estimate labor, material requirements and costs of roofing and tinsmith work.
  • Exceptional ability to supervise and train others.
Professional Experience

SunDale Industries Inc., Minneapolis
2002 - Present

Tinsmith
  • Set up a maintenance schedule according to age of buildings, season of year and present condition of buildings.
  • Inspect roofs and drainage systems periodically or in response to a problem.
  • Based on extent of the problem determine type of repair, maintenance or replacement work necessary.
  • Plan work to be performed, by estimating materials and staff needed and by preparing necessary sketches and layouts.
  • Recommend type of replacement material and method of replacement if entire roof or drainage system needs to be replaced, either by facility staff or private contractor by estimating cost of material, staff needed and difficulty of work.
  • Requisition material from storehouse.
  • Utilize the tools of the trade repairs, replace or construct roofs of all types; cut and assemble materials to specifications; apply roofing cement, tar or asphalt; caulk joints, flashing and brickwork; remove snow, ice and other debris from roof and drainage system; paint metal areas of roof; repair or replace flashings and repairs and replace drainage systems.
  • Repair, maintain and install a variety of sheet metal ware such as heating and ventilating ducts, gutters, downspouts, flashing, etc.
  • Inspect sheet metal ware to determine necessity of replacement or repair.
  • Determine gauge and type of material necessary and dimensions of material according to blueprints and layouts.
  • Assemble materials, tools and equipment required to perform work.
  • Provide verbal instructions, layouts, sketches and demonstrate proper method of performing work.
  • Observe and inspect work while in progress to insure that work is done properly and safely.

SunDale Industries Inc., Minneapolis
2000 - 2002

Tinsmith Trainee (under supervision)
  • Repaired and replaced metal, slate and mineral roof by removing old roofing, laying capsheets and by laying or applying new roofing materials.
  • Installed gutters, leaders, flashings, sky lights and metal work associated with roofs and roof drainage.
  • Repaired various types of institutional equipment, such as kitchen equipment, operating room equipment, shower and washroom equipment, etc., particularly where the repair or fabrication of sheet metal parts or pieces was required.
  • Fabricated and repaired various institutional utensils using welding, soldering and brazing techniques.
  • Waterproofed walls.
  • Formed sheet metal into shapes and sizes required for a particular job.
  • Made and riveted grooved seams, turns and beads, formed wire edges and standing seams, and performed related metal work.
  • Welded, found and sharpened tools.
  • Estimated required materials, initiated requisitions and kept records of materials used and work done.
  • Assisted in securing information for budget formulation.
  • Maintained work area in a clean, orderly and safe condition.
  • Performed routine and emergency repairs and maintenance, both scheduled and in response to emergency situations, as required.

Education

High School Diploma (2000)




"Amazing Resume Creator" - Click Here

"Instant Cover Letters" - Click Here

"Professional Resume Writing Services" - Click Here