.

.

.

Cement Mason 1 Free Sample Resume - Resume Example - Free Resume Template - Resume Format - Resume Writing






"Professional Resume Writing Services" - Click Here

"Instant Cover Letters" - Click Here

"Amazing Resume Creator" - Click Here





AMY SMITH
123 Main Street Atlanta, Georgia 30339
Home: (555) 555-1234, Cell: (555) 555-1235 asmith@sample~resume.com


Objective:   Seek the Position of Cement Mason

SUMMARY:   Exceptionally talented Cement Mason with over seven years experience in smoothing and finishing surfaces of poured concrete, such as floors, walks, sidewalks, roads, and curbs using a variety of hand and power tools; aligning forms for sidewalks, curbs, and gutters; patching voids; using saws to cut expansion joints.

Summary of Qualifications
  • Solid knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.
  • Thorough knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
  • Sound knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.
  • Profound knowledge of machines and tools, including their designs, uses, repair, and maintenance.
  • Strong ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
  • Remarkable knowledge and ability to apply mathematical principles.
  • Solid communication skill.

Professional Experience

Eagle Works Inc., Minneapolis, MN                 2002 - Present

Cement Mason and Concrete Finisher
  • Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.
  • Apply muriatic acid to clean surface, and rinse with water.
  • Build wooden molds, and clamp molds around area to be repaired, using hand tools.
  • Check the forms that hold the concrete to see that they are properly constructed.
  • Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.
  • Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
  • Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern.
  • Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.
  • Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it.
  • Fabricate concrete beams, columns, and panels.
  • Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish.
  • Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
  • Mold expansion joints and edges, using edging tools, jointers, and straight edge.
  • Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.
  • Performed other work as assigned.

Eagle Works Inc., Minneapolis, MN                    1998 - 2002

Apprentice Cement Mason (under supervision)
  • Installed, repaired, and replaced ceilings, tiles, floor tiles, and exterior roofing.
  • Prepared surface with hand and power sanders and buffers before spreading paste on surface.
  • Set tile floors and walls after spreading surface with materials such as cement grout and paste; used terrazzo machines for the application and polishing of terrazzo.
  • Layed cement bricks and blocks for interior and exterior walls.
  • Installed, finished, and patched holes in drywall.
  • Prepared and mixed materials for the work according to specifications, such as mortar, paste, cement, and slacking lime, using hand and power mixers.
  • Estimated time and materials.
  • Applied first coat or finish coat of plaster using plastering devices such as trawls, also patched plaster breaks and cracks.
  • Maintained equipment and tools used, such as mortar mixers, masonry saws, tuck pointers, grinders and electric hammers.
  • Performed masonry restoration and reproduction work on historic buildings.
  • Performed other work as assigned.

Education

High School Diploma (1998)




"Amazing Resume Creator" - Click Here

"Instant Cover Letters" - Click Here

"Professional Resume Writing Services" - Click Here