Electric Motor, Power Tool, and Related Repairers

Repair, maintain, or install electric motors, wiring, or switches.

tasks jobzones knowledge skills abilities work_activities work_context interests work_styles work_values

Tasks

• Hammer out dents and twists in tools and equipment.

• Seal joints with putty, mortar, and asbestos, using putty extruders and knives.

• Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.

• Add water or acid to battery cell solutions to obtain specified concentrations.

• Repair and operate battery-charging equipment.

• Test battery charges, and replace or recharge batteries as necessary.

• Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.

• Inspect batteries for structural defects such as dented cans, damaged carbon rods and terminals, and defective seals.

• Clean, rinse, and dry transformer cases, using boiling water, scrapers, solvents, hoses, and cloths.

• Test conditions, fluid levels, and specific gravities of electrolyte cells, using voltmeters, hydrometers, and thermometers.

Back to top

Job Zone

• Name: Job Zone Three: Medium Preparation Needed

• Experience: Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.

• Education: Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate's degree. Some may require a bachelor's degree.

• Job training: Employees in these occupations usually need one or two years of training involving both on-the-job experience and informal training with experienced workers.

• Examples: These occupations usually involve using communication and organizational skills to coordinate, supervise, manage, or train others to accomplish goals. Examples include funeral directors, electricians, forest and conservation technicians, legal secretaries, interviewers, and insurance sales agents.

• Svp range: (6.0 to < 7.0)

Back to top

Knowledge

Browse Knowledge

• Mechanical
  Knowledge of machines and tools, including their designs, uses, repair, and maintenance.

• Engineering and Technology
  Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.

• English Language
  Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.

• Mathematics
  Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

• Production and Processing
  Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.

• Design
  Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

• Education and Training
  Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.

• Customer and Personal Service
  Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.

• Computers and Electronics
  Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.

• Administration and Management
  Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.

Back to top

Skills

Browse Skills

• Installation
  Installing equipment, machines, wiring, or programs to meet specifications.

• Troubleshooting
  Determining causes of operating errors and deciding what to do about it.

• Repairing
  Repairing machines or systems using the needed tools.

• Equipment Selection
  Determining the kind of tools and equipment needed to do a job.

• Equipment Maintenance
  Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.

• Active Learning
  Understanding the implications of new information for both current and future problem-solving and decision-making.

• Critical Thinking
  Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.

• Mathematics
  Using mathematics to solve problems.

• Complex Problem Solving
  Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.

• Technology Design
  Generating or adapting equipment and technology to serve user needs.

Back to top

Abilities

Browse Abilities

• Finger Dexterity
  The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.

• Manual Dexterity
  The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

• Control Precision
  The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.

• Visual Color Discrimination
  The ability to match or detect differences between colors, including shades of color and brightness.

• Auditory Attention
  The ability to focus on a single source of sound in the presence of other distracting sounds.

• Selective Attention
  The ability to concentrate on a task over a period of time without being distracted.

• Near Vision
  The ability to see details at close range (within a few feet of the observer).

• Oral Comprehension
  The ability to listen to and understand information and ideas presented through spoken words and sentences.

• Visualization
  The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.

• Arm-Hand Steadiness
  The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.

Back to top

Work Activities

Browse Work Activities

• Handling and Moving Objects
  Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.

• Performing General Physical Activities
  Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.

• Controlling Machines and Processes
  Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).

• Repairing and Maintaining Mechanical Equipment
  Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.

• Establishing and Maintaining Interpersonal Relationships
  Developing constructive and cooperative working relationships with others, and maintaining them over time.

• Repairing and Maintaining Electronic Equipment
  Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles.

• Getting Information
  Observing, receiving, and otherwise obtaining information from all relevant sources.

• Communicating with Supervisors, Peers, or Subordinates
  Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.

• Monitor Processes, Materials, or Surroundings
  Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.

• Organizing, Planning, and Prioritizing Work
  Developing specific goals and plans to prioritize, organize, and accomplish your work.

Back to top

Work Context

• Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets
  How much does this job require wearing common protective or safety equipment such as safety shoes, glasses, gloves, hard hats or life jackets?

• Face-to-Face Discussions
  How often do you have to have face-to-face discussions with individuals or teams in this job?

• Freedom to Make Decisions
  How much decision making freedom, without supervision, does the job offer?

• Exposed to Contaminants
  How often does this job require working exposed to contaminants (such as pollutants, gases, dust or odors)?

• Sounds, Noise Levels Are Distracting or Uncomfortable
  How often does this job require working exposed to sounds and noise levels that are distracting or uncomfortable?

• Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls
  How much does this job require using your hands to handle, control, or feel objects, tools or controls?

• Exposed to Hazardous Equipment
  How often does this job require exposure to hazardous equipment?

• Indoors, Not Environmentally Controlled
  How often does this job require working indoors in non-controlled environmental conditions (e.g., warehouse without heat)?

• Telephone
  How often do you have telephone conversations in this job?

• Exposed to Hazardous Conditions
  How often does this job require exposure to hazardous conditions?

Back to top

Interests

Browse Interests

• Realistic
  Realistic occupations frequently involve work activities that include practical, hands-on problems and solutions. They often deal with plants, animals, and real-world materials like wood, tools, and machinery. Many of the occupations require working outside, and do not involve a lot of paperwork or working closely with others.

• Conventional
  Conventional occupations frequently involve following set procedures and routines. These occupations can include working with data and details more than with ideas. Usually there is a clear line of authority to follow.

• Investigative
  Investigative occupations frequently involve working with ideas, and require an extensive amount of thinking. These occupations can involve searching for facts and figuring out problems mentally.

• Enterprising
  Enterprising occupations frequently involve starting up and carrying out projects. These occupations can involve leading people and making many decisions. Sometimes they require risk taking and often deal with business.

• Artistic
  Artistic occupations frequently involve working with forms, designs and patterns. They often require self-expression and the work can be done without following a clear set of rules.

• Social
  Social occupations frequently involve working with, communicating with, and teaching people. These occupations often involve helping or providing service to others.

Back to top

Work Styles

• Dependability
  Job requires being reliable, responsible, and dependable, and fulfilling obligations.

• Attention to Detail
  Job requires being careful about detail and thorough in completing work tasks.

• Cooperation
  Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude.

• Persistence
  Job requires persistence in the face of obstacles.

• Initiative
  Job requires a willingness to take on responsibilities and challenges.

• Integrity
  Job requires being honest and ethical.

• Self Control
  Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations.

• Achievement/Effort
  Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks.

• Analytical Thinking
  Job requires analyzing information and using logic to address work-related issues and problems.

• Innovation
  Job requires creativity and alternative thinking to develop new ideas for and answers to work-related problems.

Back to top

Work Values

Browse Work Values

• Moral Values
  Workers on this job are never pressured to do things that go against their sense of right and wrong.

• Independence
  Workers on this job do their work alone.

• Security
  Workers on this job have steady employment.

• Activity
  Workers on this job are busy all the time.

• Supervision, Technical
  Workers on this job have supervisors who train their workers well.

• Support-Mean Extent
  Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.

• Supervision, Human Relations
  Workers on this job have supervisors who back up their workers with management.

• Company Policies and Practices
  Workers on this job are treated fairly by the company.

• Working Conditions-Mean Extent
  Occupations that satisfy this work value offer job security and good working conditions. Corresponding needs are Activity, Compensation, Independence, Security, Variety and Working Conditions.

• Compensation
  Workers on this job are paid well in comparison with other workers.

Back to top